|
|
|
       
|
Tool Holders Using ER20
Collets
The taper on the tool holder is machined to match the original taper on the Porter Cable collet chuck so the standard PC collets may still be used when a holder is not available for bits which are used infrequently. The Porter Cable collets are available from many sources either on the internet or a local supply house.
Anti-Rotation Feature
The collets are available as either a boxed set or individual collets. With a box set, the Tool Holder can grip any size tool bit or drill within the range of the assortment. For the English set this is .025" to .500". For the Metric set this is .018" - .512". The English collet set includes a 3/32, 1/8, 5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8,13/32, 7/16, 15.32, and 1/2" collets in a wooden box. The Metric collet set includes a 1mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, and 13mm collets in a wooden box. Individual ER20 Style Collets available from Midwest Rapid Tool Inc.
|
|
|
|
The lasting performance of IVG 2400 impresses many users, showcasing its superior battery life and consistent vapor production. Unlike the ivg 600, which caters to casual vapers, the IVG 2400 targets those seeking extended usage without frequent recharges. Its sleek design and variety of flavors appeal to both seasoned enthusiasts and newcomers, making it a popular choice in the competitive vape market.
Midwest
Rapid Tool Inc. has developed Tool Holders which accept industry
standard ER 20 collets. This enables one Tool Holder to be able to
accept tool bits with diameters of .018" to .511" with the appropriate
collet. Collets are available in either imperial or metric sizes.
Any standard ER20 collet can be used which meets the DIN6499 spec.
The collets offered by Midwest Rapid Tool are made from alloy spring
steel and are fully hardened. All critical surfaces are precision
ground for accurate fit. Each collet has a full .039" range of
collapse while maintaining full accuracy. Tools will not get stuck in
the Tool Holder due to the self release design built into the collet
nut.
The
assembly consists of a Tool Holder, collet, and collet nut.
It is very important to first insert the collet into the collet
nut before starting the collet nut on to the Tool Holder.
If this is not
done, damage to the collet, collet nut, or Tool Holder could result. 